Box making

Recently I thought that I would experiment with some new methods for box making. This particular box is made from pine, not exactly something you would use to make quality furniture with but it is really only a practise piece.

The box is joined together with mitered splines, the top and bottom panels are rebated 15mm in from each end. I made the box as one piece before separating the top using the table saw. I also put a chamfer on the front bottom edge of the box and the top of the box lid as well as the top edge on the inside of the panel, this made it look a little more decorative and also hides any uneven gaps that may appear between the lid. I cut the grooves for the splines using a jig I made for the table saw that holds the box at a 45′ angle to the blade. I finished it off with a few coats of varnish.

img_1808_27673253854_o

I’m hoping to do some more intricate box making using some finer hardwoods in the future but overall this project went really well, next time I think I’m going to get hold of some jewelry box style hinges, I used piano hinge on this box which was not idea and is a bit of a pain to work with.

img_1814_28255135866_o

img_1815_28255135396_o

Hillsfest 2016

We had a good time at Hillsfest this year! Lots of friends and new faces with stalls in the Maker’s Dome, and we really enjoyed chatting with everyone who came up to make wollen bobbles (Thanks to Jo and Sarah for running that!), and ask about all the 3D printed, lasercut and otherwise member-built things we had on display.

We know a lot of you signed up to the mailing list, and a lot more plan to drop into one of our scheduled sessions at our workshop in Portland Works. Come along! See the space, chat with our other members and find out what your local hackspace can do for you.

Hillsfest 2016 GoBoxes Hillsfest 2016 OJ Hillsfest 2016 Bobbles